RELN STORM DRAIN SLIMLINE PIT COMPLETE WITH GRATE

• Manufactured from tough, durable, UV stabilised recycled plastics
• Range of grates to suit a broad range of applications
• Range of sizes for any surface water solution or application

Features

• Form trench for Reln Storm Drain allowing for 50mm bed of packed sand.
• If Reln Storm drain will be subject to vehicle traffic, surround in concrete.
• Allow slope of approx. 30cm to every 20m.
• Join Reln Storm Drain, joins and end caps may be sealed with silicone.
• Use Reln end cap at highest point of Reln Storm Drain.
• Connect the low end of the Storm Drain to a Rainwater pit, or, using 90mm PVC pipe use built in Bottom Outlet, or fit an End Outlet to allow water to clear.
• Lay Storm Drain out with corner piece connected and end cap fitted prior to concreting.
• Storm Drain can be cut to length with a hacksaw, install with grate fitted.
• Protect grate with masking tape during concrete pour.
• Top of grate must be 2mm below concrete or paver surface.

Suitable For

• Flat grate surface for safe pedestrian, bike and wheelchair traffic.
• Diagonal slots allow faster drainage.
• Textured surface for extra grip.
• Withstands 5 tonne vehicle without moving in concrete.
• Cross braced design prevents floating when concreting and movement once set.
• Bottom outlet is an advantage when the slope is slight.
• It also allows more concrete over pipe when paving.
• Available in 1 and 3 metre lengths. 3 metre length means less work, fewer joins, less cost.
• Male/female ends on channel allow snap together joining.
• Rounded base assists rapid water flow with self-cleaning.
• End cap closes off end, and End Outlet connects to 90mm stormwater pipe.
• Stainless steel and ductile iron grates also available.
• Also available upon request, Storm Drain Civil range able to withstand 15 tonne loading.