SCREWS ANCHOR MASONRY M12 HEX HEAD GALVANISED EACH 12mm

SCREW ANCHOR MASONRY GALV 12mm

The Galvanised Screw Bolts is used to anchor into concrete, brick and blocks. Screw Bolts are also ideal for fastening into Hollow Bricks. The Galvanised Screw Bolt creates a thread into the material enabling the bolt to be removed without damage to the hole. The galvanised coating is suitable for most outdoor applications.

Galvanised Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The Galvanised coating is suitable for most outdoor applications. Please see table below for grip range, drill size and hole depth.

Also refered to as a Dynabolt, the hex head sleeve anchor is a medium duty expansion anchor, consisting of a threaded plow bolt and a pressed carbon steel sleeve, designed to expand when the cone is tightened, locking the sleeve against the wall of the hole. The hex head sleeve anchor features a collapsible design to assist clamp down of fixture. These are suitable for concrete, solid brick & concrete block.

• Sleeve Anchors are a medium duty pre-assembled torque setting expansion
• anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed
• to expand when anchor is tightened locking the sleeve against the wall of the hole.
• Features a collapsible design.