Ramset FRAMEBOSSXPMKIT 75mm Magazine FrameBoss™ XP Automatic Powder Actuated Fastener Gun Kit

Ramset FRAMEBOSSXPMKIT 75mm Magazine FrameBoss™ XP Automatic Powder Actuated Fastener Gun KitThe Ramset™ FrameBoss™ XP is a fully automatic powder actuated tool that is capable of fixing 10 pins without the need to reload or cycle the tool. The automatic piston return system and 10 pin magazine allow for faster fixing rates with less effort. The magazine can be adjusted to lock into a number of positions to allow the tool to be used in confined spaces. The FrameBoss™ XP tool is also supplied with a single shot fastener guide to allow the tool to be used with longer fasteners and assembles such as brackets and clips. With a huge 400 joules of impact energy coupled with power adjustment, the tool can be used in a wide variety of applications e.g. Timber framing, formwork and the fixing of steel track. FrameBoss™ XP is designed to get the job done quickly and save you money.
Velocity Powder Actuated Tools provide the energy to drive the Pins through material and into the substrate. For use with strip feed tools, Ramset FormMaster™, Ramset FrameMaster. Red – strong strength.

Features:
Ramset recommends to always start a new application with the minimum power load strength .
And if applicable the tool at minimum power setting expected to fulfill the job.
Then gradually increase power with a combination of load strength, tool power adjustment and pin selection.
Colour represents the strength of explosive charges.
Specifications:

Material : Brass and Plastic
Quantity Per Box : 100Collated Drive Pins designed for use with the FrameBoss? magazine for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
SPECIFICATIONS
Raw Material: Carbon Steel (Plastic Collation)
Corrosion Protection: Zinc Electroplated (Minimum coating 7?m)
Nominal Head Diameter: 8.8mm
Nominal Shank Diameter: 3.7mm
Shear Strength: 1120N/mm2
Tensile Strength: 1800N/mm2
Hardness: 50 -55HRC
This product includes:

300 x Collated Drive Pins C975C
Includes:

1 x Plastic Tool Case
1 x Single Shot Fastener Guide
2 x Cleaning Brushes
1 x Spall Guard
1 x Cleaning Cloth
1 x Lubricating Oil
1 x Ear Plugs
1x Replacement Buffer
1 x Safety Glasses
1 x Instruction Manual
Features:

Automatic piston return with no manual cycling
400J maximum impact energy
10 Pin magazine and single shot fastener guide
75mm magazine capacity
100mm single shot capacity
Power adjustment
Trigger lock
Hand guard
Easy to maintain on site
Cushioned rubber grip
Applications:

Timber framing to concrete or steel
Steel track to conrete or steel
Sacrificial formwork