$1,314.00 for 3 item(s)
What is the KlevaKlip Joist Connector?
The range of KlevaKlip Joist Connectors have revolutionised the way joists are attached to bearers. An absolute must for every handyman and quickly becoming the preferred fixing method of many builders, the Joist Connector makes the set-out and fixing off of your substructure a breeze.
Installation Information
FIXINGS REQUIRED JOIST CONNECTOR TO BEARER:
- 2 fixings on each side of bearer
- Cyclone areas C1 & C2 – 3 Fixings on each side of bearer (not suitable for areas C3 & C4)
FIXINGS REQUIRED JOIST CONNECTOR TO JOIST:
- Less than 1 metre off the ground – 1 fixing each side of joist
- Higher than 1 metre off the ground – 2 fixings each side of joist
- Cyclone areas C1 & C2 – 3 fixings each side of joist (not suitable for areas C3 & C4)
APPROVED FIXINGS:
- 35mm x 3.15mm timber connector nails
- 32mm x 2.7mm Hot Dipped Galvanised coilnails or equivalent (not suitable in cyclone areas)
- 35mm x 8g Galvanised stitching screws (not suitable in Cyclone areas)
Note: Stainless steel equivalents of the above should be used in high corrosion areas.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.