EZIPIER (SPANTEC) PIER HEAD FIXED

SPANTEC EZIPIER – FIXED PIER HEADS CORNER

Used to support steel or timber bearers or run through the deck to support roof structure.

Available to suit 75mm, 89mm and 90mm SHS

Ezipier Fixed Pier Heads can be used in place of adjustable pier heads. Ezipier Fixed Pier Heads are available in three sizes and are typically fixed to posts using 12-24×32 Wafer Head Tek Screws.

Working with Ezipier
Flush Finish: Ezipier heads are designed for a flush finish allowing cladding to run down the building face and not be kicked out by the pier head, post or ant cap.

Time Saving: Save time with one set of tradespeople to install piers and floor frame without the need for bricklayers.

True adjustability: Adjusting an Ezipier is done by turning a nut not by removing bolts or tek screws before adjusting height.

Affordable flexibility & convenience: The range of Ezipier heads have been designed to suit standard post sizes to handle most residential loads of up to 5m heights and for ease of purchase from local merchants.
Living with Ezipier
Safe perimeter: Because Ezipier heads are designed for a flush finish there are no protruding components to cause injury to those walking by including children.

Clear termite inspection point: Solid threaded rod – simple and easy to inspect and doesn’t interfere with cladding (note ant caps which can interfere with cladding are still only inspection points not “barriers”).

Base plate protector: The first pier system to provide a high capacity (5mm thick) composite protector to separate the base plate from the concrete footing for added protection against ponding of water.

BENEFITS OF EZIPIER