BOLTS & NUTS CUPHEAD METRIC M8 GALVANISED EACH 8mm x 50mm

BOLT & NUT CUPHEAD METRIC GALV EACH M8 x 50mm

Cup Head Bolt & Nuts (Coach) are used to attach wood to wood or steel with a matching nut to clamp the materials together. The coach bolt has a low profile domed head and a square section under the head which resists turning when the nut is tightened or removed. The square section pulls into the wood as the nut on the other end is tightened, thus eliminating the need for a second spanner. Used to support structure, in timber framing, outdoor furniture, fencing and retaining walls, a common example is the seat and back slats of your garden bench and table furniture
Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s.
Recently we have seen a lot of new coatings developed, mechanical galvanised and ruspert are all variations of the original galvanising

Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener